The power flush toilet is a high-performance toilet that uses a combination of gravity and a powerful pressurized water jet to clear waste with a single, water-efficient flush. With its augmented flushing capabilities, the power flush toilet is an effective and eco-friendly addition to any home. Contact RooterPLUS! to speak with a technician for more information.
What Makes the Power Flush Toilet So Effective?
The key advantage of a power flush toilet is its ability to fully and forcefully evacuate solid waste and paper from the bowl in just one flush. This is thanks to the high-pressure jet of water it activates during the flush cycle.
Standard gravity flush toilets rely solely on the moderate pull of gravity to siphon everything down the trapway, often requiring multiple flushes to fully clear the bowl. But the power flush toilet has an extra jet that thrusts water into the bowl at up to 800 psi. This intensely pressurized stream of water is able to whisk away waste and prevent clogs.
Clearing the Bowl in One Flush
With its augmented pressure-assisted flushing capabilities, the power flush toilet can confidently handle solid waste and paper in a single flush. The gravity flush alone begins the siphoning process as normal. But the high-pressure water jet then activates to give the flush an extra power boost for complete clearance of the bowl.
This strong reliable flush means no more double flushing or manual scrubbing to clear remnants. The power flush toilet uses velocity and force to fully finish the job every time. Just one flush effectively removes all waste down the trapway. To find a local plumber nearby, check out RooterPLUS! service areas.
The Added Power Comes from the Jet
The key to the power flush toilet's flushing performance is the integration of a high-pressure water jet. Here is an overview of how it works:
Initiate flush via button or lever to open the flush valve and release water from tank to bowl
Tank water flows into the bowl via gravity, beginning the siphon
Powerful jet activates, shooting pressurized water into the bowl
The circulating water and waste is thrust up and out the trapway
After several seconds, the jet valve closes and the flush is complete
This transient burst of pressurized water is the power behind the power flush. The jet perfectly complements the gravity flush by giving it an extra push to clear all contents with no remnants left behind.
Powerful Flushing with Very Little Water
Amazingly, power flush toilets achieve this superior waste clearing with very little water. The top models flush at just 1.28 gallons per flush, compared to the 1.6 gpf of a standard toilet.
The gravity flush initiates the siphon process as usual. The high-pressure jet then provides most of the real force. Less water is ultimately needed because the pressurized stream provides the bulk of the flushing power.
An Eco-Friendly Flush
Thanks to its miserly water usage - achieving a complete flush with just 1.28 gpf or less - the power flush toilet is an environmentally friendly option. This water efficiency can:
Reduce household water consumption and water bills
Lessen impact on municipal water supply and treatment systems
Minimize wastewater output
The power flush toilet proves that maximum flushing capabilities need not require maximum water usage. Its combination of gravity and pressurized jet action allows it to be both fiercely effective and responsibly eco-friendly.
Benefits Beyond the Powerful Flush
In addition to its primary job of forcefully clearing waste, the power flush toilet also:
Operates Quietly - Fewer flushes means less noise
Resists Clogs - Powerful jet prevents buildup and blockages
Saves Money Long Term - Lower water bills and avoidance of costly clogs
While its formidable flushing action may be the highlight, the power flush toilet offers other helpful perks as well. The clog resistance and potential long-term cost savings make this innovative toilet an even more attractive option.
Increasing Flushing Power in Existing Toilets
For those wishing to upgrade an existing gravity-flush toilet, there are methods to increase its flushing power without a full replacement:
Adjust tank water to proper fill level
Clear any obstructions in trapway
Replace flapper seal
Install higher flow flush valve
Add pressure-assist tank retrofit kit
Simple adjustments like ensuring adequate tank water prime the toilet for an optimal flush. A full pressure-assist conversion gives a major boost, delivering close to the power of a complete power flush toilet replacement. To schedule a plumbing service, contact RooterPLUS! now.
Flushing Without Power
During power outages, gravity toilets can still flush manually by pouring water into the bowl to initiate the siphon. But the number of flushes possible is limited by the finite tank supply.
Factors impacting capability:
Tank size - Old 2 gallon tanks limit capacity
Bowl type - Low-flow bowls need less water to flush
Waste level - Liquid waste needs less water than solids
Household members - More users means more flushes
With standard tank sizes, expect 2-4 flushes without power before the tank is empty. Turn off water supply valve to prevent overflow issues once tank water is depleted.
The Power Flush Toilet: An Optimal Choice
With its augmented flushing force, water efficiency, clog resistance, and quiet operation, the power flush toilet is a robust and eco-friendly addition to any home. The boosted performance empowers the user with maximum confidence to clear waste with just a single flush.
Various methods to increase flush power can optimize even existing toilets. But for those seeking a toilet that can truly handle anything while saving water, the power flush toilet is an ideal choice. Its combination of effectiveness and efficiency make it a smart long-term investment.
To replace or repair a toilet, contact RooterPLUS! now.